Ways to autonomously detect brake pads:

    How to detect brake pads independently? The detection is carried out according to the range of perception, thinness and thickness, and listening to the sound. The following is a detailed introduction.

    1. Feel the range

    See if you can’t stop the brakes. If you feel that way, it’s likely that the brake pads become loose and soft, which will damage the actual effect of the brake pedal. At this time, everyone must step on the brakes deeper. The pedal can achieve the actual effect of the original brake system with light stepping. At this time, you must also check whether the brake pads must be replaced, check whether the brake fluid is reduced, and whether the mildew is invalid?

    2. Check thin thickness

    The thickness of all normal brake pads is generally about 37.5px, and the brake pads will gradually become soft due to continuous friction due to the difference in use time and habit. When we use human eyes to observe that the thickness of the brake pads is only 1/3 of the original thickness (about 12.5px), the car buyer must increase the frequency of self-examination and prepare to replace it anytime and anywhere. Naturally, due to the design of the rim, there are some cars that cannot be checked by the human eye immediately. This requires professionals to disassemble and assemble the tires before they can see them.

    3. Listen to the sound of the front brake pads

    If the car buyers make a sound of "iron rubbing iron" when the brake pedal is lightened, they must not be negligent at this time and be sure to replace the brake pads immediately. When replacing the brake pads, you must also check the brake pads. Generally, this kind of noise occurs because the brake pads have already been damaged. Simply replacing the new brake pads cannot clear the sound. Replace the brake pads when necessary.