Frequently asked questions about the replacement of brake shoe clutch brake pads:

    After the brake shoe friction plate is applied for 15000km, if it is damaged or damaged to the limit, it should be replaced immediately. It can be replaced together with the brake shoes. If you only replace the brake shoe friction lining, first remove the old bolts on the brake friction lining and the burrs in the holes. When riveting the new friction plate, riveting from the middle to both sides. When replacing a new brake friction pad, the same quality friction pad should be used. The installation of the new friction plate generally uses the riveting method, and the following aspects should be paid attention to when riveting:

    1. In order to prevent the lining block from breaking in the application of the clutch friction plate of the loader and maintain excellent heat dissipation, a special clamp is used to clamp.

    2. In order to avoid the braking of the wheel, the two sides of the friction lining and the brake drum should be opened, and the two sides of the pad should be set at an inclination angle. The inclination angle is generally 75 degrees.

    3. In order to make the friction lining and the brake drum cater very well, the surface of the friction lining must be produced and processed. During the production and processing, it should be carried out according to the specifications of the inner surface of the brake drum, and the surface of the lining should be polished by exhausting the ball mill.

    4. The lower head pit on the outer surface of the friction plate, the depth is generally 2/3 of the total thickness of the friction plate.