The working principle of the motor brake pad:

    1. There is a magnetic induction brake device at the end of the friction plate brake motor. When the motor is started, it will also be absorbed by thermoelectricity and digestion. At this time, it is not easy to brake the motor. When the motor is disconnected, the brake pad will make the motor stop working under the effect of yellow spring.

    2. These two cables connect the 2 communication AC input terminals of the electronic rectifier full bridge to all the 2 input terminals of the motor and the 380 ampere input terminal of the motor, and the 2 DC output terminals are connected to the brake excitation Coil.

    3. The working principle of the brake friction plate is that when the motor is started, the electromagnetic coil can cause the adsorption force to separate the two friction surfaces at the end, and the motor can rotate at will. Conversely, the motor is braked according to the elastic recovery ability. Depending on the output power of the motor, the resistor of the electromagnetic coil is in the range of tens to hundreds of pounds.

    4. After the adjustment of the motor brake pads, it can achieve the relative characteristics necessary for work. In order to better apply the motor brake pads, it is necessary to carry out relative maintenance of the motor, which is worth mentioning. However, it is also necessary to carry out inspections on the motor brake pads on time, and immediately dismantle and repair the wear and tear of key parts.