1. Remove the brake pads and remove the manual transmission assembly

     2. Disassembly and assembly of clutch cover assembly

     1. Make a good installation mark on the clutch cover assembly and the flywheel assembly. (It can make the installation convenient and reliable without dismantling and changing the clutch cover)

     2. Unscrew the fixed anchor bolt one turn at a time until the elastic support force is completely released.

     3. Remove the fixed anchor bolts and pull off the clutch cover; remove the clutch friction plate assembly.

     3. Remove the clutch pressure plate and separate the fork

     1. Lubricate the guiding rolling bearing on the flywheel, and fill the flywheel guiding rolling bearing with grease.

     2. Install the clutch pressure plate and separate the fork pull assembly to check whether the fitness exercise of the clutch pressure plate is rolling and stable.

     3. Install the clutch friction plate assembly. Insert the guiding shaft and the clutch friction plate into the flywheel assembly.

     4. Install the clutch assembly.