Failure analysis of motor brake pads:

     In the case of a clutch disc manufacturer's failure of the motor brake pad, everyone must understand and analyze the cause of the failure, so as to help us deal with the failure, let's take a look at its failure analysis:

     1. The installation does not meet the requirements

     The gap of the motor brake pads has generally been changed and completed when it is completed and put into production. After the motor brake pads are modified, the compliance of the gap should be approved, and the compliance evaluation shall be carried out through testing and testing.

     2. The wiring of the motor brake pad and the connector are unstable

     The connecting edge should be modified together with the connecting edge of the motor stator under the special nut of the connecting wire to ensure that the customer will not impact the old connection stability when connecting the wire. This is also the countermeasure for the improvement of the motor brake pad connection line mentioned by Ms. in the head of the article. It is also an objective fact that is superfluous.

     3. The brake pads of the motor are released after plugging in

     Perhaps the reasons include the damage of the electromagnetic coil; the switching power supply has not been connected or the working voltage is not enough; the gap in the work is very small and cannot be sucked in.