The construction machinery friction lining must be replaced after a period of application, because if it is not replaced, the actual effect of everyone's brakes will not be guaranteed. So what processes do you have to go through to replace it? The key is to find it, remove the brake cylinder, take out the old one, push back the brake cylinder piston, and install the new five processes. In the content of the article, I have produced the operation steps for replacing the brake pads for everyone, and other reasons for different noises. If everyone does not understand it, it will be fine. Let's take a look at the content of the article together to make it clear!

    Operation steps for processing and replacing brake pads:

    1. Look for it

    First learn to put down the brakes, use hydraulic jacks to jack up the vehicle, and after removing the tires, you can see the brake pump installed on the brake disc, and behind the brake pump are the brake pads.

    2. Remove the brake cylinder

    To disassemble the brake cylinder, you must first use a wrench to remove the upper fixed screw. There are two fixed screws, one on the left and right. If you want to take out all the brake cylinders, you need to remove these two fixed screws.

    3. Take out the old brake pads

    After removing the brake cylinder, you can see the brake pads hidden behind. Generally, the brake pads you see are two, one is outside the brake disc, and the other is inside the brake disc.