The method of removing the burrs on the friction plate of the clutch plate:

    1. Electrolytic salt water

    The electrolysis method is used to remove the burrs of the brake pads. According to the electrolysis method, the cross holes in the hidden positions of the brake pads or the burrs in the complicated positions are removed. The production and manufacturing are highly efficient. Generally, it only takes a few seconds to tens of seconds. Remove burrs.

    2. Ultrasonic method

    The traditional vibration cutting can not solve the burr like a hole. A typical wear-resistant material flow production process uses two vertically opposed grinding cylinders to promote the brake pads left and right along the safe passage created by the workpiece and tooling fixtures. Wear-resistant materials will cause the actual effect of grinding the price of friction brake pads when entering or leaving all restricted areas.

    3. Magnetic method

    Magnetic milling means that under the effect of a magnetic field, the brake pads charged in the electromagnetic field are sorted along the direction of the magnetic induction line by magnetism, so that they are attracted to the magnetic field to produce a "brake pad brush" and release a certain amount to the surface of the workpiece. The working pressure of the magnetic field drives the "brake pad brush" to move along the surface of the workpiece to complete the deep processing of the surface of the workpiece.