Do you know what a motor brake pad is? In fact, it is the motor brake pad from the name, which is also the alias of the motor. It refers to the electromagnetic energy conversion or transmission according to the basic law of the magnetic effect of the current. Kind of magnetic induction equipment. The key function is to cause the torque of the driver. As a power device for high-power electrical appliances or various mechanical equipment, what is the purpose of this brake pad? It is developed when the motor runs at a very fast speed. A speed reduction device. So everyone knows how this motor brake pad is made? Yes, do you all know its principle? If you are not sure, just discuss the article below and find the answer in it.

    The manufacturing steps of motor brake pads:

    1. Mixing of raw materials

    Most of the brake pads are made of steel fiber, mineral wool, high-purity graphite, anti-wear agent, epoxy resin and other compounds. The friction index, wear resistance index value and noise value are measured by this The proportion of raw materials is allocated for adjustment.

    2. Hot forming

    Pour the mixed raw materials into the mold and press to form.

    3. Iron material solution

    After cutting the iron material that conforms to different car series, it needs to be hardened by beading the surface before it can be glued to prepare the brake pad prototype in advance.

    4. Compression forming link

    The use of mechanical equipment to pressurize the iron material and the brake pads at a high temperature, so that the two can be more closely connected, and the manufactured product is called the brake pad rough embryo.

    5. Heat treatment process link

    In order to make the brake pad material more stable and temperature resistant, the heat recovery device must be used to heat the rough brake pad for nearly 6 hours before it can be processed again.

    6. Milling laser cutting link

    After the heat treatment process, the surface layer of the brake pad may need many burrs, so it needs to go through grinding and laser cutting before it can be leveled.

    7. Spraying link

    In order to prevent the rust of iron materials and achieve the practical effect of beautiful appearance, it is necessary to carry out the work of spraying.